View HBM1X1M_631550.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
Bluetooth Module HBM1X1M Data Book
www.hanamciron.co.kr
Draft 0.8 Feb. 2006
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
List of contents
1 General
1.1 1.2 1.3 1.4 1.5 1.6 Overview Features Application Pinout Diagram & Outline Size Device Terminal Functions Package Dimensions
2
Characteristics
2.1 Electrical Characteristics 2.2 Radio Characteristics
3
Terminal Descriptions
3.1 UART
3.1.1 3.1.2 UART Setting UART Bypass Mode
3.2 3.3 3.4 3.5 3.6 3.7
USB SPI Kalimba DSP Audio Interface Stereo Audio Interface PCM CODEC Interface
3.7.1 PCM Configuration
3.8 Microphone Input
4
Application Schematic
www.hanamciron.co.kr
2 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
1.
General
1.1 Overview
This specification covers Bluetooth module (class-1) which complies with Bluetooth specification version 1.2 and integrates RF & Baseband controller in small package. This Module has deployed CSR's BC03-Multimedia External chipset. All detailed specification including pinouts and electrical specification may be changed without notice.
USB UART PCM I2C PIO SPI
BC03-MM
HBM1X1M
XTAL 26MHz 8Mb Flash
3.3V
www.hanamciron.co.kr
3 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
1.2 Features
Fully Qualified Bluetooth System Bluetooth 1.2 Specification Compliant Kalimba DSP Open Platform Co-Processor Full Speed Bluetooth Operation with Full Piconet Support Operating Voltage 2.7~3.6V UART Interface With programmable baud rate up to 1.5Mbaud with an optional bypass mode Full Speed USB v1.1 Interface Supports OHCI And UHCI Host Interfaces 16-bit Resolution Stereo Audio Codec, Standard Sample Rates of 8kHz, 11.025kHz, 16kHz, 2.05kHz, 32kHz, 44.1kHz And 48kHz (DAC Only) Integrated Amplifiers For Driving Microphone And Speakers With Minimum External Components Standard HCI (UART and USB) support Fully Embedded RFCOMM External 8Mbit Flash Memory Integrated 26MHz Reference Clock Competitive Size (11.6mm x11.6mm x1.6mm : LGA 44Pin)
1.3 Application
Automotive Hands-Free Kits Echo Cancellation High Performance Telephony Headsets A/V Profile Support Access Point
www.hanamciron.co.kr
4 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
1.4 Pinout Diagram & Outline Size
SPI_CSB RESET 33 32 31 30 29 28 27 26 25 24 23 PIO11 PIO10 PIO2 PIO9 PIO1 PIO0 PIO3 GND PIO8
44 43 42 41 40 39 38 37 36 35 34 ANT GND AIN_N_RIGHT AIN_P_RIGHT AIN_N_LEFT AIN_P_LEFT GND AOUT_N_RIGHT AOUT_P_RIGHT AOUT_N_LEFT AOUT_P_LEFT 1 2 3 4 5 6 7 8 9 10 11 SPI_MISO SPI_CLK SPI_MOSI PIO5 PIO6 PIO4 PCM_OUT PCM_CLK USB_DN UART_RTS USB_DP
12 13 14 15 16 17 18 19 20 21 22 PIO7 PCM_IN UART_TX UART_CTS AIO0 AIO3 GND PCM_SYNC UART_RX VCC POWER_VCC
HBM1X1M PinOut Diagram
HBM1X1M XXXX
11.60
11.60
HBM1X1M Outline Size
www.hanamciron.co.kr
5 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
1.5 Device Terminal Functions
Function
Pin Name
PCM_OUT PCM_IN
PIN No
27 18 26 17 20 19 24 21 35 Active low 32 33 31 25 23 resistor
Description
Synchronous data output Synchronous data input Synchronous data clock Synchronous data sync UART data output UART data input (idle status high) UART request to send, active low UART clear to send, active low Chip select for Synchronous Serial Interface
PCM Interface PCM_CLK PCM_SYNC UART_TX UART_RX UART Interface UART_RTS UART_CTS SPI_CSB SPI Interface SPI_CLK SPI_MISO SPI_MOSI USB_DN USB Interface USB_DP
Serial Peripheral Interface clock Serial Peripheral Interface data output Serial Peripheral Interface data input USB data minus USB plus with selectable internal 1.5K pull-up
Don't use this pin, this pin is used for controlling PIO0 42 external PA & LNA Don't use this pin, this pin is used for controlling PIO1 PIO2 PIO3 PIO4 PIO Interface PIO5 PIO6 PIO7 PIO8 PIO9 PIO10 PIO11 30 29 16 36 37 38 39 UART Bypass(UART_RTS) UART Bypass(UART_CTS) / E2PROM(SCL) UART Bypass(UART_RX) / E2PROM(SDA) E2PROM (write protect) Programmable input/output line Programmable input/output line Programmable input/output line 43 external PA & LNA 41 40 28 Programmable input/output line Programmable input/output line UART Bypass(UART_TX)
www.hanamciron.co.kr
6 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
AIN_N_RIGHT AIN_P_RIGHT AIN_N_LEFT AUDIO Interface AIN_P_LEFT AOUT_N_RIGHT AOUT_P_RIGHT AOUT_N_LEFT AUDIO Interface AOUT_P_LEFT AIO0 AIO3 RESET Others ANT VCC POWER_VCC GND 1 22 12 2,7,15,44 RF Connection to Antenna D.C Input voltage for operation (2.7~3.6V) D.C Input voltage for operation (2.7~3.6V) Ground 11 13 14 34 Low for>5ms to cause a reset Speaker output positive (left side) General purpose analogue interface General purpose analogue interface Reset if low. Input debounced so must be 6 8 9 10 Microphone input positive (left side) Speaker output negative (right side) Speaker output positive (right side) Speaker output negative (left side) 3 4 5 Microphone input negative(right side) Microphone input positive(right side) Microphone input negative (left side)
www.hanamciron.co.kr
7 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
1.6 Package Dimension
11.60
TOP VIEW
1.60
0.80 1.60 0.40 0.80 1.60
1.6
11.60
www.hanamciron.co.kr
8 page / 17 pages
0.5
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
2
Characteristics
2.1 Electrical Characteristics
Absolute Maximum Ratings
Rating Storage temperature Supply voltage : VCC Other terminal voltages Minimum -40 -0.4V VSS-0.4 Maximum 85 3.6V VCC+0.4V
Recommended Operating Conditions
Operating Conditions Operating temperature range Supply voltage : VCC Minimum -20 2.7V Maximum 70 3.6V
www.hanamciron.co.kr
9 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
2.2 RF Characteristics
Transmitter
Specification
Output power Power density Power control Frequency range 20dB bandwidth for modulated carrier Adjacent channel power
Condition
Normal Normal Normal Normal Normal 2MHz 3MHz
Min 4 2 2400 140 115
Typ 16 850 -
Max 20 20 8 2483.5 1000 -20 -40 175 80
Unit dBm dBm dBm MHz KHz dBm
Modulation Characteristics
f1avg f2max f2avg / f1avg
KHz KHz % KHz kHz
Initial carrier frequency tolerance Carrier frequency Drift
Normal One slot packet(DH1) Five slot packet(DH5)
-5 -25 -40 -40
-
5 25 40 40
Transceiver
Specification
Out of band spurious emissions
Condition
30MHz ~ 1GHz 1GHz ~12.75GHz 1.8GHz ~5.1GHz 5.1GHz ~5.3GHz
Min
Typ
Max -36 -30 -47 -47
Unit dBm
www.hanamciron.co.kr
10 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
Receiver
Specification
Sensitivity level (0.1% BER) Sensitivity level (0.1% BER) C/I performance
Condition
Single slot packets Multi slot packet co - channel 1MHz (Adjacent channel ) 2MHz ( 2 nd Adjacent channel ) 3MHz ( 3 rd Adjacent channel)
Min -70 -70 -10 -27 -27 -10 -39 -20
Typ -88 -88 -
Max 11 0 -30 -40 -
Unit dBm dBm dBm
Blocking performance
30MHz ~ 2000MHz 2000MHz ~ 2400MHz 2500MHz ~ 3000MHz 3000MHz ~ 12.75GHz
MHz
Intermodulation performance Maximum input level
n=5
KHz dBm
-10
-
www.hanamciron.co.kr
11 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
3
Terminal Descriptions
3.1 UART
Four signals are used to implement the UART function. UART_TXD and UART_RXD transfer data between the two devices. The remaining two signals, UART_CTS and UART_RTS, can be used to implement RS232 hardware flow control where both are active low indicators. 3.1.1 UART Setting
User can change data format the following selection using PSKEY. However, host shall communicate with default setting UART connection initiated at first time.
Baud Rate = (PSKEY_UART_BAUD_RATE) / 0.004096
Parameter
Baud Rate Flow Control Parity Number of Stop Bits Bits per channel
Possible value
9600 ~ 1.5M Baud RTS/CTS or None None, Odd or Even 1 or 2 8
3.1.2
UART Bypass Mode
Switch the bypass to PIO[7:4] as shown in figure. When the bypass mode has been invoked, module enters the deep sleep state indefinitely.
RESETB RXD CTS UART_CTS RTS TXD Host Processor UART Test Interface BlueCore4-ROM CSP UART_RS PIO7 RX Another Device UART_TX UART_RTS PIO4 TX PIO5 RTS PIO6 CTS
www.hanamciron.co.kr
12 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
3.2 USB
This Bluetooth module contains a full speed (12Mbit/s) USB interface that is capable of driving a USB cable directly. No external USB transceiver is required. The device operates as a USB peripheral, responding to requests from a master host controller such as a PC. Both the OHCI and the UHCI standards art supported. The set of USB endpoints implemented can behave as specified in the USB section of the Bluetooth specification v1.2 or alternatively can appear as a set of endpoints appropriate to USB audio devices such as a set of USB speakers. Since USB is a master/slave oriented system (in common with other USB peripherals), This Module only supports USB slave operation.
3.3 SPI (Serial Peripheral Interface)
BlueCore3-Multimedia External uses 16-bit data and 16-bit address serial peripheral interface, where transactions may occur when the internal processor is running or is stopped. The BlueCore3-Multimedia External is the slave and receives commands on SPI_MOSI and outputs data on SPI_MISO.
1 2 3 4 5
Reset the SPI interface Write the command word Write the address Write or read data words Termination Hold SPI_CSB high for two SPI_CLK cycles Take SPI_CSB low and clock in the 8 bit command Clock in the 16-bit address word Clock in or out 16-bit data word(s) Take SPI_CSB high
3.4 Kalimba DSP
The Kalimba DSP is an open platform Kalimba DSP allowing signal processing functions to be performed on over-air data or CODEC data in order to enhance audio applications.
www.hanamciron.co.kr
13 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
The key features of the DSP include: 32MIPS performance, 24-bit fixed point DSP Core Single cycle MAC of 24 x 24-bit multiply and 56-bit accumulate 32-bit instruction word Separate program memory and dual data memory, allowing an ALU operation and up to two memory accesses in a single cycle Zero overhead looping and branching Zero overhead circular buffer indexing Single cycle barrel shifter with up to 56-bit input and 24-bit output Multiple cycle divide (performed in the background) Bit reversed addressing Orthogonal instruction set Low overhead interrupt
3.5 Audio Interface
The audio interface circuit consists of a stereo audio CODEC, dual audio inputs and outputs, and a PCM, I2S or SPDIF configurable interface. The interface for the digital audio bus shares the same pins as the PCM CODEC Interface :
PCM Interface
PCM_OUT PCM_IN PCM_SYNC PCM_CLK SPDIF Interface SPDIF_OUT SPDIF_IN I2S Interface SD_OUT SD_IN WS SCK
3.6 Stereo Audio Interface
The main features of the interface are: Stereo and mono analogue input for voice band and audio band Stereo and mono analogue output for voice band and audio band
www.hanamciron.co.kr
14 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
Support for stereo digital audio bus standards such as I2S Support for IEC-60958 standard stereo digital audio bus standards i.e. S/PDIF and AES3/EBU Support for PCM interfaces including PCM master CODECs that require an external system clock
3.7 PCM CODEC Interface
Pulse Code Modulation (PCM) is a standard method used to digitize audio (particularly voice) patterns for transmission over digital communication channels. Through its PCM interface, this module has hardware support for continual transmission and reception of PCM data, so reducing processor overhead for wireless headset applications. This module offers a bi-directional digital audio interface that route directly into the baseband layer of the on-chip firmware. It dose not pass through the HCI protocol layer. Hardware allows the data to be sent to and received from a SCO connection This module interfaces directly to PCM audio devices including the following : - Qualcomm MSM 3000 series and MSM 5000 series CDMA baseband devices - OKI MSM7705 for channel A-law and u-law CODEC - Motorola MC145481 8-bit A-law and u-law CODEC - Motorola MC145483 13-bit linear CODEC - STW 5093 and 5094 14-bit linear CODECs
3.7.1
PCM Configuration
The PCM configuration is set using two PS keys, PSKEY_PCM_CONFIG32 and PSKEY_PCM_LOW_JITTER_CONFIG. The default for long frame sync and interface master generating 256KHz PCM_CLK with no tristating of PCM_OUT.
Parameter
Mode Clock Rate Slave, Master
Possible value
Master Mode : 128, 256, 512KHz
www.hanamciron.co.kr
15 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book Slave Mode : up to 2048KHz Sync Formats Data Formats Long frame sync, Short frame sync 13 or 16bit linear, 8 - bit A - law to u - law
3.7 Microphone Input
The audio-input is intended for use from 1A@94dB SPL to about 10A@94dB SPL. With biasing-resistors R1 and R2 equal to 1k, this requires microphones with sensitivity between about - 40dBV and - 60dBV.
Microphone Bias R2 C1 C3 R1
BlueCore3-Multimedia External
AIN_P_LEFT AIN_N_LEFT
C4
C2 + MIC1
Microphone Biasing (Left Channel Shown)
www.hanamciron.co.kr
16 page / 17 pages
HBM1X1M Bluetooth V1.2 Class 1 Module Data Book
5
Application Schematic
VCC
22
VCC
10uF
47nF
34
RESET
220k
POWER_VCC
12
PIO0 PIO1 PIO2 PIO3 PIO4 PIO5 PIO6 PIO7 PIO8 PIO9 PIO10 PIO11 UART_TXD UART_RXD UART_CTS UART_RTS
42 43 41 40 28 30 29 16 36 37 38 39 20 19 21 24
OTHER_DEV
UART_TXD UART_RXD UART_CTS UART_RTS
HOST
UART_RXD UART_TXD UART_RTS UART_CTS USB_DP USB_DN PCM_SYNC PCM_CLK PCM_OUT PCM_IN
BT_EN
POWER_VCC
10uF
USB_DP 23 USB_DN 25 PCM_SYNC 26 PCM_CLK PCM_IN 18 PCM_OUT 27 SPI_CSB SPI_CLK 32 33 SPI_MISO 31 SPI_MOSI AIN_N_RIGHT 4 AIN_P_RIGHT AIN_N_LEFT 5 6 AIN_P_LEFT
3 35 17
L
1
ANT
C
C
GPIO
AUDIO OUT
AOUT_N_RIGHT AOUT_P_RIGHT AOUT_N_LEFT AOUT_P_LEFT
13 14
AIO0 AIO3
AUDIO IN
2 7 15
GND GND GND 44 GND
AOUT_N_RIGHT 9 AOUT_P_RIGHT 10 AOUT_N_LEFT 11 AOUT_P_LEFT
8
AIN_N_RIGHT AIN_P_RIGHT AIN_N_LEFT AIN_P_LEFT
VBAT
VCC
VBAT
POWER_VCC
1
IN GND EN
OUT
5
1
IN GND EN
OUT
5
C 10uF
2 3
C 4.7uF BYP
4
C 10uF C 0.01uF
2 3
C 4.7uF BYP
4
MIC5259-3.3BD5
MIC5259-3.3BD5 0.01uF
C
BT_EN
BT_EN
www.hanamciron.co.kr
17 page / 17 pages

▲Up To Search▲

Price & Availability of HBM1X1M

	To Download HBM1X1M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .